OMI - IMO537Ee - Guidelines for the Sampling and Analysis of Dredged Material Intended for Disposal at Sea
search
  • googlemap
  • OMI - IMO537Ee - Guidelines for the Sampling and Analysis of Dredged Material Intended for Disposal at Sea

OMI - IMO537Ee - Guidelines for the Sampling and Analysis of Dredged Material Intended for Disposal at Sea

25,35 €
TTC
OMI
Carte ou livre numérique en téléchargement En langue anglaise
En stock
10 jours en Colissimo, 3 à 4 jours en DHL (+frais de douane à payer à la livraison)
Livre de l'Organisation Maritime Internationale
IMO537Ee

Fiche technique

Picto
Carte ou livre numérique en téléchargement
En langue anglaise
Derniers articles en stock
Paiements 100% sécurisés
Description détaillée

Ouvrage en langue anglaise.

Cet ouvrage existe en version papier et en version numérique dans un format vérouillé à lire avec la liseuse de l'OMI (gratuite).

In the framework of the London Convention 1972 and the 1996 protocol thereto generic "Waste Assessment Guidance" (WAG) were approved in 1997 for eight d'fferent types of waste allowed to be d'mped'at sea. One of them is d'edged material.

Complementing the Waste Assessment Guidance, s'ecific guidelines for assessment of the d'fferent wastes were d'veloped'and'adopted in 2000, among them the s'ecific Guidelines for Assessment of d'edged Material (LC/SG 24/11, annex 3).

To further support practical implementation of this generic guidance, particularly for d'edged material, the Scientific Group prepared'an overview of information covering some of the main working s'eps:

  • selection of substances of concern and effects to be détermined;
  • field sampling;
  • and physical, chemical'and biological'analysis. The guidance contained in this publication addresses the points above and is an amal'amation of two documents produced for the London Convention 1972 and the 1996 protocol thereto;
  • Guidelines for the sampling of sediment intended for d'sposal'at sea (LC 24/17, addendum 1);
  • and selection and'analysis of physical'and chemical parameters for the assessment of d'edged material qu'lity (LC/SG 26/12, annex 2).
Loading...